"

波音线上注册 -?送彩金app拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,波音线上注册 -?送彩金app更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,波音线上注册 -?送彩金app让您尽享娱乐、赛事投注等,且无后顾之忧!

              "

              超顺机电

              详细说明

              电芯老化

              城市
              全国
              收藏
              • 产品说明

              一、电芯老化设备简介:

              1.1 设备功能和原理介绍:设备采用热风强制对流加热的方式,每个腔体控制系统相对独立,以满足不同时间出入炉需求;每套加热控制系统采用双重电子式温控器控制,以保证控温精度及可靠的异常超温保护需求。


              1.3   电芯老化总体结构

              整机外型尺寸: (大约)长:5050mm;深:2000mm;高:2400mm

                  工作室有效内尺寸: 深:1900mm;宽:1000mm;高:1800mm


               



              A, equipment introduction:

              1.1 equipment function and the principle is introduced: with the method of hot air forced convection heating, each cavity is relatively independent control system, in order to satisfy the demands of different time of charging; Each heating control system adopts double electronic thermostat control, to ensure that the temperature control precision and reliable abnormal overtemperature protection requirements.

              1.3 overall structure

              The machine installation dimensions: (approximately) length: 5050 mm; Deep: 2000 mm; Height: 2400 mm.

              Studio in the effective size: deep: 1900 mm; Width: 1000 mm; Height: 1800 mm

              Second, the equipment can adapt to the processing and product specifications

              2.1 per room can be placed two stand for a car, at the same time let stand for car size: 670 mm wide; 820 mm long; 1660 mm high.

              Third, equipment technical parameters

              3.1 equipment 40-80 ℃ temperature range.

              3.2 equipment temperature control precision is + / - 5 ℃.

              3.3 equipment failure rate of 1% or less (caused by equipment failure)

              3.4 equipment of furnace chamber under no-load condition from room temperature up to + 80 ℃ is less than 30 minutes.

              3.5 equipment within the cavity size: 1000 * 1800 * 1900 (width * * deep).

              3.6 electrical equipment: three-phase voltage 380 v, current 120 a, 30 kw power.

              3.7 compressed air: 6-8 KGF/cm

              3.8 wind pressure and flow rate of 716 pa / 4110 m2 / h

              3.9 weight: total weight 580 kg total weight and the ratio of the load bearing area of 500 kg/M2 or less


              二、设备能适应的来料和产品规格

              2.1每间房可同时放置2个静置车,静置车尺寸:宽670mm;长820mm;高1660mm

              三、电芯老化设备技术参数

              3.1 设备的恒温范围40-80℃。

              3.2 设备的温度控制精度±5℃。

              3.3 设备故障率1%(指由设备造成的故障)

              3.4 设备的炉腔空载状态下从室温升到+80小于30分钟。

              3.5 设备的内腔尺寸:1000*1800*1900(宽**深)。

              3.6 设备电气:电压三相380V,电流120A, 功率30KW

              3.7 压缩空气  6-8kgf/cm

              3.8 风压和流量 716pa/4110m2/h

              3.9 重量:总重580Kg  总重与承重面积之比≤500kg/M2

              在线客服
              - 欧生
              • 点击这里给我发消息
              - 销售 欧先生
              • 点击这里给我发消息
              ×
              波音线上注册 -?送彩金app